Pro Pack Group shrink wrap and shrinkfilm machinery shrinkfilm supplies and machinery
shrinkwrap machinery bagging bundling systems stretchwrap carton sealers strapping feeders   polyethelene film polyolefin packaging PVC material plastic bags dome bags packaging supplies shrinkfilm equipment
About
Materials
Machinery
Service

Inquiry
Distributors
Training

Trade Shows
What's New?

Brochures
Videos
Used
Machines

Contact Us
Directions


Distributor
Section

Home>Machinery>Strapping Systems

Strapping Systems

 

 

Strapping Systems

 

Strapping Material

Hand Strapping Systems

We are proud to introduce our new line of strapping tools. They all can run either polypro or polyester strapping. The kit comes with a battery, charger and manual. Please fill out the warranty card in the box when you get the tool and send them back to us. The 22 line is adjustable from 1/2 inch to 5/5 inch and the 26 line has the option of 3/4 inch strap also. When ordering, please state strap size to be used as we will set it up and test them before they are sent out to you.

 

Eagle 100
Semi-Automatic Strapping System

  • Up to 50% less sealing head parts than our competition.
  • Single piece, vibration resistant, heater bar.
  • LS1 limit switch (senses strap insert by the operator) is mounted outside the sealing head for easy inspection and adjustment. Most competitors still have theirs under the sealing plate in back of the head.
  • No fuses- all circuit breakers.
  • Heavy duty 3 wire power cord and plug.
  • Adjustable cool time for high tension applications requiring more time to solidify the weld.
  • Safety electrical interlock on table top come standard.
  • Touch pad control with automatic home.
  • Non-Contact tension detector for longer life.

 

Eagle 200
Semi-Automatic Strapping System

  • 5 to 15.5 mm strap width
    (5mm thru 5/8 inch)
  • 110 Volt - 60 hz - single phase
  • Open Case Design - easy loading
  • 1.5 second cycle time
  • External Tension
  • Locking Casters
  • Hinged Stainless Steel Table Top
  • Reliable Design - Over 50,000 units sold worldwide

 

Eagle 250
Semi-Automatic Strapping System

  • Up to 50% less sealing head parts than our competition
  • Single piece, vibration resistant, heater bar
  • LS1 limit switch (senses strap insert by the operator) is mounted outside the sealing head for easy inspection and adjustment. Most competitors still have theirs under the sealing plate in back of the head
  • No fuses- all circuit breakers
  • Heavy duty 3 wire power cord and plug
  • Adjustable cool time for high tension applications requiring more time to solidify the weld
  • Safety electrical interlock on table top comes standard
  • Touch pad control with automatic home
  • Non-Contact tension detector for longer life
  • Stainless steel side seal

 

Eagle 300
Semi-Automatic Strapping System

  • 5 or 6 mm strap
  • 110 volt 60Hz single phase 10 Amp
  • 50-60 straps a minute depending on arch size
  • Easy load
  • Self threading
  • Anti-jam feature
  • Various arch size available
  • Locking casters

 

Eagle 400
Semi-Automatic Strapping System

  • Up to 50% less sealing head parts than our competition
  • Single piece, vibration resistant, heater bar
  • LS1 limit switch (senses strap insert by the operator) is mounted outside the sealing head for easy inspection and adjustment. Most competitors still have theirs under the sealing plate in back of the head
  • Strap feeds through pallet for banding loads to pallet
  • Portable
  • No fuses- all circuit breakers
  • Heavy duty 3 wire power cord and plug
  • Adjustable cool time for high tension applications requiring more time to solidify the weld
  • Safety electrical interlock on table top come standard
  • Touch pad control with automatic home
  • Non-Contact tension detector for longer life

 

Eagle 500
Semi-Automatic Strapping System

  • 9, 12 or 15.5mm available (3/8, 1/2 or 5/8 inch)
  • Various arch sizes available
  • 110 volt, single phase, 60 cycles
  • Mechanical outside tension control
  • Heavy duty casters
  • Head switch - will not cycle if strap is not in proper location
  • Automatic re-feed - if strap is not under slide plate unit, will re-feed strap automatically
  • Can cycle by ball switch, palm switch or foot switch
  • 27 straps per minute
  • Stainless table tops with rollers
  • Reliable, stable design - over 20,000 units sold worldwide

 

Eagle 600
Automatic Strapping System

  • 9,12 to 15.5mm available (3/8 - ½ or 5/8 inch)
  • Various arch sizes available
  • Standard arch size of 32 inches wide and 23 inches high
  • 110 Volt - 60 hz - single phase
  • Mechanical outside tension control
  • Heavy duty casters
  • Head switch - will not cycle if strap is not in proper location
  • Can cycle by ball switch, palm switch or foot switch
  • 27 straps per minute
  • Reliable, stable design - over 20.000 units sold worldwide


Eagle 700
Automatic Strapping System

  • Self threading
  • Compact design - internal strap reel
  • Auto loop ejector
  • One piece arch
  • Adjustable height
  • High speed - 50 straps per minute
  • 5 - 6 or 9mm Strap (5mm thru 3/8 inch)
  • Various arch sizes available
  • Standard arch size of 25 inches wide and 16 inches high
  • 110 Volt - 5 am p system
  • Cycle by button or footswitch (photoeye switch & foot bar optional)
  • Smooth stainless steel table tops
  • Mechanical outside tension control
  • Locking casters
  • Fully automatic model available


Eagle 701cc
Automatic Strapping System

  • Self Threading
  • Auto loop ejector
  • One piece arch
  • Adjustable height
  • High speed-35 straps per minute
  • Full-width pneumatic press
  • 5,6 or 9mm strap (5mm-3/8 inch)
  • Various arch sizes available
  • Compact strapping head-multi brushless DC motors
  • 30% fewer parts
  • Touch screen & self diagnostics
  • 110 volt, 10 amp system
  • Fully automatic system, 1-2 or 3 strap option
  • Knurled drive rolls
  • Hinged tops
  • Variable conveyor speed

 

Eagle 701bp
Automatic Strapping System

  • Self Threading
  • Auto loop ejector
  • One piece arch
  • Adjustable height
  • High speed-35 straps per minute
  • Full-width pneumatic press
  • 5,6 or 9mm strap (5mm-3/8 inch)
  • Various arch sizes available
  • Compact strapping head-multi brushless DC motors
  • 30% fewer parts
  • Adjustable strap placement 1-2 or 3 strap on side control panel
  • Belt drive
  • Hinged tops
  • Variable conveyor speed
  • 110 volt, 8amp system

 

Eagle 800
Automatic Strapping System

  • Self threading
  • Short feed sensor
  • Strap end ejector
  • Loop ejector -anti jam feature
  • Proximity switches
  • 30 straps per minute
  • 5 - 6 or 9mm Strap (5mm thru 3/8 inch)
  • Various arch sizes available
  • Standard arch size of 32 inches wide and 23 inches high
  • 9 and 12mm strap widths (3/8 and ½ inch)
  • 110 Volt system
  • Various cycle methods - button, footswitch or photoeye
  • Solid state system
  • Heavy duty casters
  • Side seals and fully automatics available

 

Eagle 801bp
Automatic Strapping System

  • Self threading
  • Short feed sensor
  • Strap end ejector
  • Loop ejector - anti jam feature
  • Electronic tension
  • Proximity switches
  • Stainless steel table tops
  • 30 straps per minute
  • 9 and 12mm strap widths (3/8 and 1/2 inch)
  • 110 volt system
  • Various arch sizes available
  • Various cycle methods - button, foot switch or photo-eye
  • Solid state system
  • Heavy duty casters
  • Side seals and fully automatics available
  • Conveyor belt or roller drive
  • Optional Compression

 

 

 
shrink wrap machines